top of page

Wave Towers de "Jesolo"

Venice - Italy

3/3: JESOLO WAVE TOWERS

LegGO-FLOOR floor slab for 58 APARTMENTS SPLIT BETWEEN 2 high-rise blocks.

​

In the seaside resort of Jesolo, in the province of Venice, these modern wave towers presented a new vertical challenge. 58 apartments split between two high-rise blocks located in a new and dynamic setting.

Two towers built over a shared basement equipped with a pool and outside space/garden, bearing the respective names Gold Tower and Platinum Tower. The Gold Tower, distinguished by its amber and warm exterior colour, features 16 storeys above ground level with 32 homes. The Platinum Tower has a metallic external appearance in a cooler tone and comprises 13 storeys above ground level with a total of 26 homes.

The construction of these two buildings certainly represented a technical challenge, as they are high-rise constructions on primarily sandy soil, located in a seaside town close to the beach. The objective was therefore to streamline as much as possible the tower complex: this was achieved through the use of 4,000 square metres of LegGO-FLOOR insulating floor slabs. Thanks to the extremely lightweight nature of this eco-friendly, earthquake resistant and energy saving material, it was possible to considerably reduce the weight of the two towers, thereby increasing the safety and speed of construction on site.

Moreover, Plastbau Solai slabs contributed to achieving a highly energy efficient building and to the well-being conditions being rated Class A.

WALLS
GO-WALL
  • From high-rise buildings to residential homes, our insulating formwork walls are the fast, economical and solid solution for your building project. 

​

  • Our all-in-one complete wall solutions per floor are delivered assembled and ready to cast.

​

  • The thickness of the concrete, which can vary from one project to the next, will be determined by your engineering firm. The steel reinforcement required will also be stipulated by your engineers.

​

  • On-site training is offered by our internal staff. Training is provided for wall assembly and for casting.

FLOORS
GO-FLOOR
  • Our insulating slabs have been designed to allow you to create floors and finish your storey levels with an extremely solid insulating ceiling.

  • the operation involves laying insulating slabs and their related reinforcement followed by casting a concrete screed which will therefore be reinforced.

​

  • the reinforcing steel and the height of the screed will be determined by your engineering firm according to your spans and the load-bearing requirements.

​

  • The insulating slabs are light and easily manoeuvred, and therefore easy to lay. They can have a span of up to 8 continuous metres

WALLS (residential)
GO-BLOC
  • Insulating concrete form blocks

  • very fast assembly

  • a building system that is very easy to handle, thanks to its lightweight and precise interlocking structure

  • extremely easy cut-outs 

  • perfect thermal insulation and airtightness

  • an excellent solution to combat heat bridges

  • 6-10 times stronger than traditional constructions  

  • guaranteed cleanliness on site and less construction waste!

​

  • And last but not least, we provide training direct on site 

Planning your Project
  • Our design office will provide a detailed study of your project in French, Dutch, Italian or English, along with specific plans and a detailed quantity survey.

​

  • The estimate provided will have no hidden surprises, as it will include not only the insulating elements that we can provide but also the additional elements that go with our products such as concrete, reinforcing steel, or other items that you would purchase from your local building merchants.

​

  • We will also take responsibility for providing information to your partners, architect, engineer, and EPB certifying authority about our various products and solutions

Training and coaching
  • Our team of managers and specialist workers will be responsible for providing exclusive training on your site as well as providing training in slab and wall assembly through to pouring concrete after form work and shoring. 

  • Additionally, we are available 24/7 to help you over the phone via our help desk in the first instance and then with site visits, all you need to do is ask.

​

  • "Contractor" training is also offered on all our products when undertaking large scale sites (buildings for example)

Hire - Purchase of props  
  • ​Are you a self-builder planning to build?  Opt for a hire solution that is much more economical than buying.

​

  • Are you a contractor and plan to work on several sites with our products and solutions, then either opt initially for rental and then buy, or go straight for the most suitable purchasing option.

​

  • Our props, now in their 4th generation, ensure the wall's structure is maintained during pouring, but also facilitate the adjustment of its alignment and verticality, and facilitate risk-free casting of one floor at a time.

Consulting
  • Our experienced teams, specialist engineers, site managers, specialist workers can respond directly to any questions you have regarding our products or simply regarding all elements on your site.

​

  • We are at your service, and where appropriate we are there for your teams as well, with the shared objective of ensuring optimum safety, quality and comfort conditions for your site.

​

  • We also support our partners, distributors and contractors, on simple request, in all financial, operational, commercial aspects as well as marketing

bottom of page